Lifting Equipment

ATS ELGI Electro – Hydraulic Clear Floor Lifts are the most popular lifts in the Passenger Vehicles Segment. Used for lifting vehicles to any comfortable working height up to 6 feet, leaving head room for complete under-chassis access.

Applications

Muffler repair

Rust – proofing operation

Transmission repair

Any other repair calling for a wheel free condition

Features:

Clear floor design- Makes working beneath the vehicle easy

Arm resistant on each arm engages when the vehicles is lifted

Manual release locking system for two sides

Two full stroke cylinders- One in each column

Rubber pad for door opening protection

Telescopic Arm pads for quick and easy vehicle contacts

Note: For more models, kindly visit the attached PDF.

ATS ELGI Electro – Hydraulic Clear Floor with CE Certification complies with the European Standards with respect to safety, health, environment & consumer protection. This hoist is used for lifting vehicles to any comfortable working height up to 6 feet, leaving head room for complete under-chassis access.

Applications

Muffler repair

Rust – proofing operation

Transmission repair

Any other repair calling for a wheel free condition

Note: For more models, kindly visit the attached PDF.

ATS ELGI Electro – Hydraulic hoist with base is used for lifting vehicles to any comfortable working height up to 6 feet. High raised vehicle can be easily accommodated in this lift. Electro – Hydraulic operation saves power and maintenance cost.
Applications
Muffler repair
Rust – proofing operation
Transmission repair
Any other repair calling for a wheel free condition

Features:
Gantry free design enables to service high raised vehicle
Arm resistant on each arm engages when the vehicles is lifted
Manual release locking system for two sides
Two full stroke cylinders (Inverted Cylinder) – One in each column
Rubber pad for door opening protection
Telescopic Arm pads for quick and easy vehicle contacts

Note: For more models, kindly visit the attached PDF.

As a market leader holding almost 65% market share in India for Two post lifts segment. Hydraulic two post lift is our front end warrior and prime sales driver. In-order to strength our hold and technological advantage in market, we are glad to introduce additional feature of “Single point lock release system” with our Hydraulic two post lifts- 4 Ton Lifting Capacity.

Features:

• Pneumatically operated system.
• Eliminates Manual intervention for unlocking
• Ensures double safety- Avoids human error occurring due to manual lock release. Unlike manual method, lift can be locked at any position with single point lock release.

Advantages:

• Base free design makes working beneath the vehicle easy.
• True symmetric column design
• Arm restraints on each arm engages when the vehicle is lifted 
• Pneumatically operated Single point lock release system ensures additional safety.
• Two full stroke cylinders, one in each column
• Rubber door- opening protection
• Telescopic arm pads for quick and easy vehicle contact.

Note: For more models, kindly visit the attached PDF.

ATS ELGi being market leader in lifts with almost 60% market share, is committed to continuous R & D and product improvements to increase end user productivity and business revenue.

Features:

• Pneumatically operated Single point lock Release system– Ensures double safety.
• LED Lamp– This wireless LED Lamp with magnetic holder is perfect for accessing small engine work and provides easy access in dark areas.
• Pneumatic Tool with Holder– ½ “Impact wrench suitable for heavier jobs in modern tire and automobile workshops.
• Wall Mounted tyre inflator– Pre-set economic Air inflator- Wall mounted with supply pressure of 12.5 bar (180 Psi). Single phase operated

Advantages:

• Base free design makes working beneath the vehicle easy.
• True symmetric column design
• Arm restraints on each arm engages when the vehicle is lifted
• Pneumatically operated Single point lock release system ensures additional safety.
• LED Lamp- This wireless LED lamp with magnetic holder is perfect for accessing small engine work and provides easy access in dark areas
• Pneumatic tool holder-  1/2  inch impact wrench suitable for heavier jobs in modern tire and automobile workshops
• Digital tyre inflator- Pre-set Economic Air inflator – mounted in lift with supply pressure of 12.5 Bar (180 Psi) – Single phase operated.

Note: For more models, kindly visit the attached PDF.

Primarily used for Under Body repairs and Wheel Alignments, ATS ELGI Electro Hydraulic Four Post Lifts ensures high safety and stability. The vehicle can be raised to any height up to 6 feet based on the requirement.

Applications

• Wheel alignment
• Wheel changing
• Under chassis Inspection
• Transmission system Inspection

Features:

• Extra wide platforms to accommodate all types of cars
• Adjustable ratchet rails- ensure that platforms are completely horizontal
• Rears slip plates for wheel alignment purpose
• Jacking beam (wheels free arrangement) for wheel changing purpose
• Quick and steady raising mechanism
• Easily adjustable
• Space saving (Can be used for vehicle parking)

ATS ELGI is one of the leaders in hydraulic washing hoist segment. Our lifts can be used for washing and lubrication of all types of passenger and commercial vehicles.

Applications

Washing passenger & Light commercial vehicle

Lubricate passenger & Light commercial vehicle

Features:

Supports both indoor & outdoor Installation

Slide rail arm assembly can be provided for easy mounting of vehicles on the heavy duty ramps

Uniquely designed wiper rings to prevent entry of water and dirt particles into the hoist cylinder while raising, servicing and lowering

Gland rings are used in the plungers to increase performance

High-grade steel plungers manufactured to close tolerance with hard chrome plating for high wear-resistant

Note: For more models, kindly visit attached PDF.

Washing hoist with Arm attachment eases the vehicle loading procedure. Unique design occupies less washing area. Used for Lifting, washing and lubricating all types of passenger & Light commercial vehicle.

Applications

• Washing passenger & light commercial vehicle
• Lubricate passenger & light commercial vehicle

Features:

• Supports both indoor & outdoor Installation
• Arm attachment in place of heavy duty ramps for easy loading of monocoque and chassis type vehicle
• Uniquely designed wiper rings to prevent entry of water and dirt particles into the hoist cylinder while raising, servicing & lowering
• Gland rings are used in the plungers to increase performance
• High-grade steel plungers manufactured to close tolerance with hard chrome plating for high wear-resistant

Note: For more models, kindly visit attached PDF.

Washing lift with platform. This Platform has been specifically designed to lift the vehicle by wheels in order to prevent fouling of the under chassis with the ramp in case of vehicles with low ground clearance. This platform has been extensively tested for suitability of all models of passenger vehicle and its installation will support both indoor & outdoor operations.

Applications

• Washing passenger & light commercial vehicle
• Lubricate passenger & light commercial vehicle

Features:

• Support both indoor & outdoor installation
• Platform (Integral ramp) in place of heavy duty ramps for easy lifting the vehicle with wheels in turn saves time & increase productivity
• Uniquely designed wiper rings to prevent entry of water and dirt particles into the hoist cylinder while raising, servicing & lowering
• Gland rings are used in the plungers to increase performance
• High-grade steel plungers manufactured to close tolerance with hard chrome plating for high wear-resistant

Note: For more models, kindly visit attached PDF.

ATS ELGI Washing hoist 16 ton is preferred choice to wash commercial vehicles upto 16 ton, the in ground hydraulic hoist also offers great versatility. It can be used to hoist, wash and lubricate all types of heavy commercial vehicles.

Applications

•  To wash commercial vehicles
• To lubricate commercial vehicles

Features:

• Supports both indoor & outdoor Installation
• Slide rail arm assembly can be provided for easy mounting of vehicles on the heavy duty ramps
• Uniquely designed wiper rings to prevent entry of water and dirt particles into the hoist cylinder while raising, servicing and lowering
• Gland rings are used in the plungers to increase performance
• High-grade steel plungers manufactured to close tolerance with hard chrome plating for high wear-resistance
• Dual Plunger with 8 Ton each

Note: For more models, kindly visit attached PDF.

Heavy Duty Mobile Column Lifts are technically advanced Electro-Hydraulic lift suitable for assembling & repair of Heavy Duty Vehicles. Available in various combinations of tonnage and number of columns based on the requirement.

Applications

• Full axle repair & replacement
• Suspension repair or replacement
• Wheel replacement / Stub Axle repair
• Engine repair or replacement
• Waste oil removal

Features:

• Splash proof power supply unit
• Lifting carriage with fixed wheel engaging forks
• Unique synchronization system
• Each column is equipped with a control box & hydraulic pump unit
• Self error diagnostic functions
• Equipped with remote control
• Each column have LCD Display
• Optional axle stand

Note: For more models, kindly visit attached PDF.

Two wheeler lifts are the preferred choice for top auto manufacturers, for their service stations. Our pneumatically operated two wheeler lifts are well stabilized in the market, offering you to maximize your floor area by consuming less space.

Applications

Specially designed for two-wheeler servicing

Suitable for repair and maintenance under normal conditions

Features:

MS top – Ensuring high strength

Pneumatically operated – Easy operation

Features ultra modern look which is the added value and provides elegance to the work place

Note: For more models, kindly visit attached PDF.

Two wheeler washing lift provides smart way to wash two-wheelers. This system is designed to wash four vehicles at a time resulting in saving of time and water. This installation will support both indoor & outdoor operation.

Applications

• Washing of two wheelers (4 vehicles at a time)

Features:

• 4/3/2 Platform variants are available
• Support both indoor & outdoor installation
• Lifting and washing of four vehicles at a time
• Easy access of all parts of the vehicle
• Reduce operation time & Improves productivity
• Enable efficient utilization of water resources
• Uniquely designed wiper rings to prevent entry of water and dirt particles into the hoist cylinder while raising, servicing and lowering
• Gland rings used in the plungers to increase performance
• High-grade steel plungers manufactured to close tolerance with hard chrome plating for high wear-resistance

Note: For more models, kindly visit attached PDF.

ATS ELGI Washing Hoist – 8 Ton is preferred choice to wash the light & medium commercial vehicles which fall below 8 ton capacity. The in ground hydraulic hoist also offers great versatility. It can be used to hoist, wash and lubricate all types of light & medium range commercial vehicles.

Applications

• Washes passenger & light commercial vehicle
• Lubricates passenger & light commercial vehicle

Features:

• Supports both indoor & outdoor Installation
• Slide rail arm assembly can be provided for easy mounting of vehicles on the heavy duty ramps
• Uniquely designed wiper rings to prevent entry of water and dirt particles into the hoist cylinder while raising, servicing and lowering
• Gland rings are used in the plungers to increase performance
• High-grade steel plungers manufactured to close tolerance with hard chrome plating for high wear-resistance

With the lifting capacity of 4 Tons,this lift has been specifically designed to suit all type of wheel alignment operations and to deliver maximum productivity out of your available space. This model supports both on ground & in ground installation options to ensure maximum flexibility of the available workspace.

Applications

• Wheel Alignment
• Wheel Changing
• Under Chassis Inspection
• Transmission System Inspection

Features:

• Ultra-thin structure design, suitable for both ground & underground installation
• Pressure control safety mechanical lock assures, safety operation
• Equipped with emergency decline manual pump interface, can bring down vehicle by using manual pump
• Adopt series synchronous hydraulic pressure loop for better synchronization
• Safety protection (Lift at “400 mm to ground will have alarm” effectively prevent accidental injury)

Note: For more models, kindly visit attached PDF.

Consumes lesser space compared to other lifts, this lift is very tidy and ideal for high end workshops, Easy to work all around vehicle without obstacles. Specially used for quick service bay and inspection bay.

Applications

• Quick inspection bay
• Wheel Changing
• Under Chassis Inspection
• Transmission System Inspection

Features:

• Ideal for pre-delivery inspection
• Very easy to load and unload
• Air controlled locking for safety
• Very rugged and durable
• Rubber pads on the platform to protect the vehicle chassis

Note: For more models, kindly visit attached PDF.

Ideal for Quick Repair Bays and Inspection bays, Wheels Free Double Scissor Lift has a lower footprint and ensures higher productivity.

Applications

• Quick inspection bay
• Wheel Changing
• Under Chassis Inspection
• Transmission System Inspection

Features:

• Dual cylinder with Master Slave technology ensures hydraulic synchronization between platforms.
• Traditional mechanical system with pneumatic release or manual release has been eliminated by introducing hydraulic lock.
• Velocity fuse has been used for protection against sudden leakage like hose burst.
• Limit switch for maximum lifting height to avoid motor over run.
• Manual Lowering through unloading valve – easy lowering even in power is off.
• Rubber pads are used for lifting the vehicles.

Note: For more models, kindly visit attached PDF.

ATS ELGI provides optimal free moving space at work station through In ground Two Piston Lifts for repair and maintenance works. It is a clean and ergonomic solution for workshops.

Applications

• Muffler repair
• Rust – proofing operation
• Transmission repair
• Any other repair calling for a wheel free condition

Features:

• 100% watertight
• Corrosion free and durable
• Hot dip galvanized cassette steel frame
• Resistant against acids, oils & lubricants
• Eco-friendly, sustainable and 100% recyclable
• Lengthwise and crosswise adjustable aluminium slider plate

Suitable for the vehicles up to 4.5 Ton weight, this lift can be raised up to a working height of 6 feet.

Applications

• Muffler repair
• Rust – proofing operation
• Transmission repair
• Any other repair calling for a wheel free condition

Features:

• Clear floor design- Makes working beneath the vehicle easy
• Arm resistant on each arm engages when the vehicles is lifted
• Separate power panel ensures more safety from electrical hazard.Dead man controls system- 24 V DC
• Equipped with Hose bust valve to prevent damage from hose / crimping end failure
• Manual release locking system for two sides
• Two full stroke cylinders- one in each column
• Rubber pad for door opening protection
• Telescopic Arm pads for quick and easy vehicle contacts

Note: For more models, kindly visit the attached PDF.